revised 10/16/2013 www.phihong.com 80w* universal input series psa60 series switching power supply *80w rated at 20cfm air flow cooling. features ? high efficiency ? built-in emi filter ? over voltage protection ? short circuit protection applications ? disk/tape drive systems ? microprocessor systems ? peripheral equipment ? mixed logic applications safety approvals ? cul 1950 ? tuv en60950 ? csa 22.2 234 ? ce (low voltage directive) mechanical characteristics ? length: 127mm (5in) ? height: 40.0mm (1.58in) ? width: 76.2mm (3in) ? weight: 360g (4.7oz) output specifications model (2) dc output voltage load (1) ripple p-p (3) total regulation output pins min. max. at 20cfm psa60-105 +5v 0.0a 10a 10a 100mv 2% 1,2,3 PSA60-112 +12v 0.0a 5.0a 6.6a 120mv 2% 1,2,3 psa60-115 +15v 0.0a 4.0a 5.3a 150mv 2% 1,2,3 psa60-124 +24v 0.0a 2.5a 3.3a 240mv 2% 1,2,3 psa60-148 +48v 0.0a 1.2a 1.4a 300mv 2% 1,2,3 psa60-202 +5v (v1) 1.0a 6.0a 8.0a 50mv 2% 2,3 +24v (v2) 0.1a 1.3a 1.8a 240mv 5% 1 psa60-203 +5v (v1) 1.0a 4.0a 6.0a 50mv 2% 2,3 +12v (v2) 0.3a 3.5a 4.5a 120mv 5% 1 psa60-301 +5v (v1) 1.0a 6.0a 8.0a 50mv 2% 2,3 +12v (v2) 0.3a 2.2a 3.0a 120mv 5% 1 -12v (v3) 0.0a 0.3a 0.5a 120mv 5% 6 psa60-302 +5v (v1) 1.0a 6.0a 8.0a 50mv 2% 2,3 +12v (v2) 0.1a 1.2a 1.8a 120mv 5% 1 -12v (v3) 0.1a 1.2a 1.8a 120mv 5% 6 psa60-303 +5v (v1) 1.0a 6.0a 8.0a 50mv 2% 2,3 +12v (v2) 0.3a 2.2a 3.0a 120mv 5% 1 -5v (v3) 0.0a 0.5a 0.5a 50mv 5% 6 psa60-304 +5v (v1) 1.0a 6.0a 8.0a 50mv 2% 2,3 +15v (v2) 0.3a 1.5a 2.0a 150mv +10%/-3% 1 -15v (v3) 0.0a 0.5a 0.5a 150mv 5% 6 * total output power must not exceed 60w at convec tion cooling and 80w at 20cfm air flow cooling. (1) peak output current lasting less than 30 seconds with duty cycl e less than 10%. during peak lo ading, peak total power must not exceed 80w. (2) minimum order quantity of 1000 pieces is required when ordering this series (3) ripple & noise is measured at 20mhz bandwidth limit by use a 12 inch twisted wire terminated with a 10uf capacitor in paral lel 0.1uf ceramic capacitor. phihong is not responsible for any error, and reserves the right to make changes without notice. please visit our website at ww w.phihong.com for the most up-to-date specifications and contact information.
psa60 characteristics www.phihong.com input: ac input voltage rating 100 to 240v ac ac input voltage range 90 to 260v ac ac input frequency 47 to 63hz input current 2.0a maximum leakage current 0.75ma maximum at 240v ac, 50hz inrush current 15a for 120v ac 30a for 240v ac hold-up time 10ms at normal load and 120v ac output: efficiency 70% typical at normal load and 120v ac over-voltage protection >120% maximum over-current protection short circuit protection ? auto restart environmental: temperature operation 0 to 50c non-operation -25 to +85c humidity operation 5 to 95% non-condensing emissions fcc class b vfg 243 general: insulation resistance input to output: 7m ohm dielectric withsta nd (hi-pot) test input to output 2200v dc for 1 minute, 10ma switching frequency 50khz typical mtbf (full load and ambient 25c) 50k hrs dimension diagram unit: mm (inch)
|
